|
Model |
TR-70 Series | |||
|---|---|---|---|---|
| 70E | 70D | 70A | ||
| TRAVEL | ||||
| X-Travel | mm | 700 | ||
| Y-Travel | mm | 400 | ||
| Z-Travel | mm | 400 | 500 | |
| Table to Spindle Nose | mm | 150~550 | 150~650 | |
| TABLE | ||||
| Table Size | mm | 850x420 | ||
| Max.Load | kgs | 250 | ||
| T-Slot | mm | 14x100x4 | ||
| SPINDLE | ||||
| Speed | rpm | 8000 | ||
| Max. Tapping Speed | rpm | 3000 | ||
| Taper | 7/24 NO:40 | |||
| Transmission | Belt | Direct drive | ||
| FEED RATE | ||||
| Rapid Speed G00) | M/min | 48/48/48 | ||
| Cutting feedrate (G01) | mm/min | 10000 | ||
| MAGAZINE | ||||
| Tool Shank | BT# 40 | |||
| Change Method | Armless | Armless | Arm | |
| Capacity | 12 | 14 | 24+1 | |
| Max. Length | mm | 250 | ||
| Max. Dia. | mm | 100 | 80 | |
| Max. Tool Weight | kgs | 3 | 4 | |
| Time (T to T) | sec | 1.8 | 2.2 | |
| Time (C to C) | sec | 2.7 | 3.1 | |
| MOTOR | ||||
| X-Axis | kw | 1.5(Mitsubishi) / 1.2(Fanuc) | ||
| Y-Axis | kw | 1.5(Mitsubishi) / 1.2(Fanuc) | ||
| Z-Axis | kw | 3.0(Mitsubishi) / 3.0(Fanuc) | ||
| Spindle | kw | 5.5/3.7 | 7.5/5.5 | |
| DIMENSIONS | ||||
| W x D x H | cm | 190x252x280 | 200x252x280 | |
| Net Weight | kgs | 3350 | 3600 |
|
TRIDENT TR70 TAIWAN
2019 MODEL ILK SAHIBINDEN
700x440x580... LINEER KIZAK
M80 FULL KALIPCI KONTROL
BT40 DIREK 10.000 DEVIR
24 ATC MAGAZIN
29500
SOLD
SOLD
SOLD
SOLD
SOLD
SOLD
SOLD
SOLD
SOLD
SOLD
SOLD
29500